RONAN Engineering
VISUAL ANNUNCIATOR WITH INTEGRAL LOGIC
SERIES X11SN, X12
The X11SN multipoint systems feature alarm modules with on-board alarm
logic
for single, dual, triple, and quad windows, lit by Light Emitting Diodes
(LED's) or two incandescent lamps. The X12 system provides for single point alarm logic
modules driving lamp or LED based window display from single to quad arrays per mechanical
modules.
The alarm logic, based on CMOS or microprocessor, is designed to generate any of the ISA 18.1 alarm sequences and a large number of custom sequences. The logic is designed to meet IEEE 472 Surge Withstand Test and high noise immunity requirements.
On-board options, such as optoisolation for live AC or DC voltages, analog or transistor inputs, time delays, selectable dual audible, ringback audible, short circuit proof lamp drivers, lamp dim, and dual colors are available.
Auxiliary function modules, such as auxiliary contact modules, reflash modules, loss of motion detector and analog input modules may be integrated individually or in combination into the various systems.
X11SN Solid State Annunciator GENERAL SPECIFICATIONS
- System Voltage:
- Lamps, Logic - 24 Vdc ± 20%
- Field Contacts - 24 Vdc, 48 Vdc, 125 Vdc, 115 Vac, or 240 Vac
- Power Source (System External):
- Power Supply - 115 Vac 50/60 Hz; 240 Vac 50/60 Hz
- Converter - 24 Vdc, 48 Vdc, or 125 Vdc
- Temperature Range: Operating 0° to 60° C (32° to 140° F)
- Storage -40° to +60° C (-40° to +140° F)
- Inputs:
- Contact - Dry or Live; Normally Open / Normally Closed; Field Selectable
- Interrogation Voltage - 24 Vdc, 48 Vdc, 125 Vdc, 115 Vac, or 240 Vac
- Response Time: 10 milliseconds
- Surge Withstand Capability (SWC):
- Input and Power Connection - IEEE 472-1974 and ANSI/IEEE C37-90-1978
- Outputs:
- Visual - Fast Flash, Slow Flash, Steady ON, Intermittent Fast Flash
- Audible - Dual, Selectable by Window
- Auxiliary Relays - Form C, Selectable Form A or B; Normally Not Energized or Normally Energized
- Contact Rating - General Purpose: 3 Amp. @ 28 Vdc; 2 Amp. @ 115Vac
- Common System Relay - Selectable Retransmit or Common Trouble Alarm
- Contact Rating - General Purpose and Hermetically Sealed; 10 Amp. @ 28 Vdc, 10 Amp. @ 115 Vac
- Controls:
- Momentary Push Button - Integral or Remote; Single Pole, Normally Open; +V Switched;
- Silence, Acknowledge, Reset, Test
- System Size:
- Basic Cabinet Module - 3.5 inch (89 mm) x 3.5 inch (89 mm); For detailed sizes see Sales Brochure.
- System Weight: Per Cabinet Module - 5 pounds (2.3 kg), not including Power Supply
| Name | |
| Title | |
| Company | |
| Address | |
| Phone |