Home Up Feedback Search

ACME 

 

Home
Up
ACME
REXA
JOWA USA, Inc.
Ronan Display Div.
Ronan Leak Detection
Ronan I/O
Ronan Measurements
INDEECO
Indeeco Controls
LINATEX

[Product Image] 
 

Acme Engineering was founded in 1956 and began large-scale production of its own Heating, Ventilation and Air Conditioning (HVAC) equipment in 1968.   ACME maintains production facilities in Mooers, New York and Montreal, Canada.

Since the 1980's, ACME has concentrated on gas monitors for ventilation control.

Featured Units

bullet01-01E1R  CO (Carbon Monoxide) Detector designed to provide smaller garages with high quality, reliable CO detection at a moderate cost for single speed fans.   Single SPDT output contact closure at Low Level (35 PPM) or High Level (100 PPM) with independent audible alarm output.
bullet01-01E3-R  CO Detector, for detection and control of ambient conditions, 3 levels with integral alarm, SPDT output contacts, 35 PPM-100PPM alarm or 50PPM-150PPM alarm.  Visual display of status, corrosion resistant split enclosure with vandal proof screws, integral or remote sensor, factory calibrated.  01-01E3 Picture.
bulletCP-01-01E3R  CO Central Control Panel incorporating individual modules for each location of remote sensor.  Two factory calibrated levels and common zone alarm.   Panel incorporates logic of ventilation control according to space requirements.   High reliability system is factory calibrated after 2 weeks of operation in test room.  Central Panel Picture.
bulletCEL-32  CO multiplex central control panel with capacity of 32 points per panel using RS-485 protocol for connecting all points.   Status indication at both central panel and local sensor stations.  Displays conditions of all points at all times.   Eliminates risks of damage during construction by using plug-in sensor stations on covers installed when space is ready for use.  Customized outputs for on-off or VAV fan control.  Multiplex Panel Picture.
bullet IAQ-24-01/05  General Indoor Air Quality sensing unit ideal for office, recreational facilities and residential use.   Four stages of pollution levels are monitored and 3 outputs for control.
bullet VOC-2  Volatile Organic Compounds detection and control unit, corrosion resistant gasketed enclosure, two factory calibrated operating levels, visual indicators, audible alarm, temperature compensation, SPDT contacts for ventilation control can be calibrated to various VOC's.

ACME ENGINEERING PRODUCTS INC.
Timex Building, Route 11
Mooers, New York
Phone: 518-236-5659
Fax: 518-236-6941

Information Request Form

Select the items that apply, and then let us know how to contact you.

Send product literature
Send company literature
Have a salesperson contact me

Name
Title
Company
Address
E-mail
Phone

Questions or comments about this web site should be sent to sales@whcinc.com.
Last modified: 03/31/09